Brief introduction
| model | HongJin-M801 |
| Specification | 300ML/branch |
| characteristic | HongJin-M801 is a one-component moisture-curable elastic structural adhesive. Its main component is a special silane-modified polymer that cures by reacting with moisture in the atmosphere. This product is colorless and highly transparent in appearance, non-flowing paste. This product has good bonding properties to a variety of materials, including glass, metal, rubber, plastic, wood and inorganic materials, etc. |
| Applicable Products | Various electrical and electronic products, especially suitable for sealing, potting, insulating and waterproofing of connectors for automobiles and mobile phones. |
Technical parameter
| Attributes | Reference |
| type | Silane Modified Polymer |
| density（m/cm3） | 1.5±0.10 |
| hardness（Shaw BrothersA） | 35±10 |
| Dry time（min） | ≤70 |
| Shear strength（MPa）,7sky25℃/50%RH,AL/AL | ≥0.8 |
| Elongation（%）, 7sky25℃/50%RH | ≥300 |
| Operation time（After opening） | 30minute |
Precautions
1、Clean and dry the surface to be adhered to.
2、Squeeze the glue onto the cleaned and clean surface to make it evenly distributed, and then close and fix the surface to be adhered.
3、The thickness of the potting should not exceed 5mm as far as possible. The deeper the adhesive layer is, the longer the curing time is.
4、The speed of curing is related to temperature and humidity. High temperature and high humidity can promote moisture curing. It takes 7 days to fully cure.
5、It is recommended to store in a dry and cool place below 30°C.
Landline ：0755-28307837
Mail ：sales@szhjtec.com
contact ：吳先生 18688927121
王先生 13332958891
address ：深圳市龍崗區坪地街道教育北路49號5B棟501
Scan and pay attention to the public number
Copyright ? 2020 深圳市宏進科技有限公司All Rights Reserved 粵ICP備20066503
Scan and pay attention to the public number