Brief introduction
| model | HongJin-S721 |
| Specification | 20g/branch |
| characteristic | HongJin-S721 is a one-component heat-curing elastic silicone rubber. Its main component is a polymer containing vinyl siloxane and silicone resin, which is cured by heating and reacting. No heat release and no shrinkage during the curing process, this product has a translucent appearance, and the liquid is transparent after curing. This product has good bonding properties to a variety of materials, including glass, metal, rubber, plastic, wood and inorganic materials, etc. |
| Applicable Products | It is widely used in the bonding and sealing of LED lamps, electronic appliances and other products, especially suitable for sealing, potting, insulation and waterproofing of automobile and mobile phone connectors and chip buffer protection in optocoupler components. |
Technical parameter
Exterior | colorless translucent liquid |
Viscosity（mpa.s） | 6500±1500 |
density（g/cm3） | 1.05±0.1 |
hardness（Shaw BrothersA） | 15～25 |
Curing method | 120℃/1小時 |
Shear strength（MPa）,7sky25℃/50%RH,AL/AL | ≥0.5 |
Precautions
1、Organotin compounds and other organometallic compounds. This product needs to be stored at low temperature (below -20 ℃), and should be taken out 2 hours in advance when it is used for the first time to restore to room temperature. During the use process, attention should be paid to avoid contact with the following substances.
2、Silicone rubber containing organotin compounds.
3、Sulfur, polysulfides, polysulfones and other sulfur-containing materials.
4、Amines, urethanes, or other amine-containing materials.
5、Unsaturated hydrocarbon plasticizer.
Landline ：0755-28307837
Mail ：sales@szhjtec.com
contact ：吳先生 18688927121
王先生 13332958891
address ：深圳市龍崗區坪地街道教育北路49號5B棟501
Scan and pay attention to the public number
Copyright ? 2020 深圳市宏進科技有限公司All Rights Reserved 粵ICP備20066503
Scan and pay attention to the public number